Connecting A Dterm Series I Multiline Terminal; Figure 4-5: Connecting A Multiline Terminal To The System; Figure 4-6: Leading Line Cords On A Multiline Terminal - NEC Xen alpha Installation Manual

S 3
E C T I O N
These instructions for connecting a Multiline Terminal to the system apply to all of the
D
C
ONNECTING A
D S
TERM ERIES I
1.
M
ULTILINE
T
ERMINAL
2.
92
term
Series i Multiline Terminals (DTR).
Plug the telephone cord into the modular jack on the bottom side of the Multiline
Terminal. The handset is also attached to the bottom side of the Multiline Terminal.

Figure 4-5: Connecting a Multiline Terminal to the System

Lead the telephone and handset cords through the appropriate grooves.

Figure 4-6: Leading Line Cords on a Multiline Terminal

Installation Manual, Chapter 4 – Installing Dterm Series i Multiline Terminals
A6-506000-642-01(8508), Release 6.0, November 2003