Status - Comdial DX-80 Technical Manual

The following screen shows the results of the COM4 board diagnostics.
No loop current detected
4. To exit the report screens, press the ESC key. When prompted Exit This Feature?, select Yes.

3.6.3 STATUS

You can use the Status function to view a specific DX-80 system resource status.
1. Move the cursor to the system resource to view, and press
October, '03
DX-80 Installation & Maintenance
Enter
Comdial
Other possible codes:
- Passed = Loop OK
- In = Incoming Call
- Out = Outgoing Call
- Failed = Loop Fail
- Open = Not Equipped
.
91