Comdial DX-80 Technical Manual page 57

DX-80 Installation & Maintenance
WARNING
Circuit boards are susceptible to damage caused by electrostatic
discharge. You must keep this in mind as you handle the circuit
boards. Refer to Comdial publication IMI01-005, Handling of Electrostatically
Sensitive Components, for details.
4. Locate the CPM at the right-hand side of KSU1 above the 408M (and COM4 if installed).
5. Position the AAM over the CPM-AAM connectors as illustrated in the following diagram.
AAM
CPM
6. Press firmly (but not forcefully) on the AAM to secure a good connection into the CPM-AAM
connectors.
7. Replace KSU cover and secure with cover screws.
8. Restore KSU power.
October, '03 Comdial 57