Maintenance Utilities - Comdial DX-80 Technical Manual

4. Enter the telephone number at the site location. Then press
Note: If modem connection at this site requires a human to transfer the modem call to the DX-
80 modem (ext 199), you must have a standard telephone connected to the same circuit as the
modem so that you can verbally request the answering person to transfer the call.
Dialing begins and then the modems negotiate connection. If the negotiation is successful the
system displays [Mdm] in the upper left portion of the screen.
Once a modem connection has been accomplished, you can perform an F5-Connect. F5-Con-
nect is required to link PC-DBA to the DX-80 CPM processor.

3.6 Maintenance Utilities

Once the F5-Cnt operation is successfully completed and the system has established a link between
PC-DBA and the DX-80 processor, you can use the maintenance utilities.
1. The PC-DBA Maintenance screen appears as follows. Notice that the system indicates a suc-
cessful connection to the DX-80 processor by displaying [Cnt] in upper left corner.
Also, for reference and diagnosis, the system displays the current software version of the con-
nected DX-80 system and PC-DBA—note KSU Revision: K16UM0.F32 in the upper part of the
screen (DX-80 software version) and R16UM0.A33 in the lower part of the screen (PC-DBA
version).
the arrow keys
2. Use
utility is described in Section 3.6.1, Configuration through Section 3.6.11, I/O Memory Map-
ping.
October, '03
to select the appropriate maintenance utility and then press
Comdial
DX-80 Installation & Maintenance
Enter
.
Enter
. Each
83