Pass-Through Communications With Corporate Office Dx; Pc-Dba Control Menu; F1 - Help; F2 - A-Save - Comdial DX-80 Technical Manual

DX-80 Installation & Maintenance

3.5.3 PASS-THROUGH COMMUNICATIONS WITH CORPORATE OFFICE DX

Pass-through Communications is a feature associated with the Corporate Office DX 7270C hard drive
voice mail board. This feature allows you to communicate with the DX-80 or the in-skin voice mail
system through a single modem number. There are specific setup procedures required to activate this
feature. Refer to Comdial publication IMI72-005 for further information.

3.5.4 PC-DBA CONTROL MENU

At the bottom of the PC-DBA screen, special control functions of PC-DBA are shown. The following
line/bar can be found at the bottom of the display:
Use the associated "F" (Function) keys on the PC keyboard to access the various operations. The func-
tions and their specific operation are detailed in the following sections.

3.5.4.1 F1 - Help

Press F1 to view the help menu of PC-DBA. There are two help screens. Use the Page Down key to
move to the second screen.

3.5.4.2 F2 - A-Save

This function key is used to save the database to the PC automatically. For details on using this
function key, refer to the DX-80 Technical Manual: Volume II, Programming.

3.5.4.3 F2 - U-Save

This function key is used to save the database to the PC manually. For details on using this function
key, refer to the DX-80 Technical Manual: Volume II, Programming.

3.5.4.4 F3 - Receive

This function key is used to receive the database from the system. For details on using this function
key, refer to the DX-80 Technical Manual: Volume II, Programming.

3.5.4.5 F4 - Send

This function key is used to send the database to the system. For details on using this function key,
refer to the DX-80 Technical Manual: Volume II, Programming.
October, '03 Comdial 79