Extension Feature Status Check; Extension Password - Comdial DX-80 User Manual

3. When the display reverts back to idle condition, the "DND" is removed
from the display.

Extension Feature Status Check

To find out the current condition of features on your telephone, press
and review the following features:
a) LNR = empty
b) SNR = No Saved Number
c) Memo = No Saved
Number
d) Telephone Lock = No
e) Auto Hold = No
f) Page Receive = Yes
g) Busy Ring = Yes
h) Hotline to = NULL
i) Position
j) Tenant Group
k) Pickup Group
l) Paging Group
Operation
1. The telephone must be idle.
2. Press
3. The display shows the contents of LNR (Last Number Redial).
4. Use the right Interactive button [next] to advance through all of the
various extension features.

Extension Password

All extensions of the DX-80 system have an associated User Password.
Passwords are used to facilitate Phone Lock, Call Forward Remote and
Attendant features. Password length is from four to eight characters and is
determined in system programming.
Operation – Change Your Extension Password
1. Press
DX-80 Digital Executive Telephone User Guide
m) Day COS = 0
n) Eve COS = 0
o) Monitor COS = 5
p) Warning Tone = No
q) Drop Call Out = No
r)
s) Intrusion Active = Yes
t)
u) Intrusion Tone = Yes
v) ECF Operation = No
w) SMDR Output = Yes
x) ICM Mode =
.
.
PSWD :_
bksp show chg
Drop Call In = No
Intrusion Accept = Yes
- / /
VC HF PR
Page 41
TN