System Criteria And Capacity - Comdial DX-80 Technical Manual

Overview

1.15.2 SYSTEM CRITERIA AND CAPACITY

Time slots
Customer database memory
protection
Ports:
CO/PBX/Centrex Lines
Digital Stations
Standard Single Line
Telephones
DTMF Receivers:
DTMF Senders:
Tone Detectors: (used to
monitor call progress tones;
Busy Tone, Ring-back Tone,
etc.)
Contacts
Conference circuits
DISA circuits
System Attendants
Tenant Groups
UCD/Hunt Groups:
Members per group:
Group Types:
Hunting Method:
30
PCM - 32 time slots x 4 Highways (128 voice channels)
TDM 64 Time Slots (data processing)
300 hours via on-board lithium battery (no charging required)
16
48
16 Note: 32 total possible digital extensions in this configuration.
One dedicated per single line telephone port
Unlimited. (DTMF signal generation is derived from the core system
tone resource. Tone combinations are available as needed.)
2 (shared for advanced call processing system features; DISA, ECF,
ABR. etc.)
1 LBC can be programmed as associated to a CO line or dialed by an
extension to actuate the contact
8 - 4 party conference circuits
Any number of CO lines may be programmed for DISA operation.
(AAM required for operation.)
1 Attendant + 1 alternate per tenant group
3
24
24
UCD or Voice Announce
Linear, All Ring or Distributed
Comdial October, '03