Part Names - Mitsubishi MELESEC-ST User Manual

5 POWER DISTRIBUTION MODULES

5.3 Part Names

6)
1)
3)
4)
6)
Front view
No. Name
1) RUN LED
2) ERR. LED
3) SYS. LED
4) AUX. LED
5) Faceplate
Slice module fixing hooks (both
6)
ends)
7) Coding elements
5 - 11
2)
5) 7)
Rear view
Bus refreshing module
Refer to Section 5.3.1.
• Indicates the I/O module status with the above LEDs 1) to 3).
• The diagram of wiring to base module is printed on the surface. When
checking the wring diagram, remove the symbol label.
Hooks for mounting/removing the slice module to/from the base module.
Hold down the hooks at both ends, and remove the module.
Provided to prevent a wrong slice module from being inserted into the base
module. The slice module can be inserted only when the coding element of
the base module matches that of the slice module. Refer to Chapter 8 for
details.
1) 2) 6)
4)
7)
6)
Front view
Power feeding module
Application
MELSEC-ST
5) 7)
Rear view
5 - 11