3B - Operating Instructions; 3C - Setting The Time; 3D - Setting The Display For 12 Or 24-Hour Display - Valor Inspire L Installer And Owner Manual

OWNER GUIDE
appears at the bottom left hand corner of the display, immediately release the power
button. (A second flash of the unlock light and a longer beep will also sound at the
time to release the power button). The Fire should be lit within a few seconds.
N.B.
If power button is held for more than a few seconds after second flash/beep/word pilot
appears, the command is ignored for safety reasons.
Similarly, if it is released too soon before the word pilot appears, the command is also
ignored.
The control has been designed to ensure that only intended ignition of the fire occurs.
To stop – with handset held to unlock it, press then release power button.

3b - Operating instructions

Upon successful insertion of the batteries into the Handset
the display will be as shown. The handset will be supplied
paired to the fire and all that is required is to set the time of
day and select if a 24h hour clock or 12 hours clock
display is required and if temperature display is on Celsius
or Fahrenheit.

3c - Setting the time

Holding the handset as described previously to unlock the keypad, press and
hold "SET" for a few seconds and the display will be as shown

3d - Setting the display for 12 or 24-Hour display

As always when pressing the remote-control buttons keep
the control held to keep the green light on and therefore
handset safety feature, unlocked.
The H indicates that it is time to set the timer to either 24-
hour display or 12 Hour (AM or PM) display.
Press the + or – button on the handset to toggle between
the two settings. When you are ready to confirm the setting you want press the "SET"
button to progress to setting the day of the week.
© Page 47
GDC Group Ltd. SEPT 2018