Placement Of Clear Glass Pebbles; Placement Of Grey Chips And Natural Vermiculite Flakes - Valor Inspire L Installer And Owner Manual

INSTALLER GUIDE
15.3.2 Open the bag of Clear Glass Pebbles (approx 700g) and carefully empty out
the entire contents as in the below picture. The use of Gloves is recommended.
The glass pebbles need to fully cover the glass panel evenly above the LEDS and
flow out to the sides but not to the front or rear of the Top tray.
NOTE: Care is needed when laying out to ensure no pebbles rest against or fall down
where the pilot unit is located to the rear.
15.3.3 Open the bag of Grey Vermiculite Chips (approx 400g) and carefully layout the
entire contents as in the below picture to the outsides of the top tray. Larger chips can
be broken up to achieve the desired effect.
Open the bag of Natural Vermiculite Flakes (approx 100g) and carefully spread out
the entire contents as in the above picture, evenly scattered on top of the glass
pebbles and flow out to the sides but not to the front or rear of the Top tray.
NOTE: Care is needed when laying out to ensure no chips or flakes rest against or
fall down where the pilot unit is located to the rear.
©
Page 30
GDC Group Ltd. SEPT 2018