Placement Of The 3 Large Logs; Fitting The Top Tray Onto The Burner Unit - Valor Inspire L Installer And Owner Manual

INSTALLER GUIDE
15.3.4 Fit the three large logs as shown in the below picture. The logs are marked on
there underside with 1, 2 or 3 dimples to identify them running left to right as in the
below picture.
NOTE: Ensure when laying these three logs in place, that no pebbles, chips or flakes
interfer with how they sit onto the burner tubes. Clear any such items away from the
base of the logs on the Top tray before placing.
15.4 Refit the window door panel, hook the top of the window door panel onto the top
of the inner convector box. Lower the glass door till it covers fully the opening of the
inner convector box. Screw back into place as before by hand with the M5 knurled
screw in a clockwise direction just under the center base of the window door frame.
These screws only require to be hand tightened closed.
15.5 Replace the visual baffle, carefully slide back into place as before the visual
baffle. The magnets on the convection box will hold it in position.
© Page 31
GDC Group Ltd. SEPT 2018