Lighting The Fire; Adjusting Flame Height; Turning Off; Led Fuel Effect Checks - Valor Inspire L Installer And Owner Manual

INSTALLER GUIDE

- 14.3.2 Adjusting flame height.

When the burner is operating step the slider handle to the RHS, increments will be
felt as the slider moves giving you the following outputs;
Position 1 - After ignition Center burner is on LOW
Position 2 - Moving slider handle one increment to RHS, Center burner is on HIGH.
Position 3 - Moving slider handle one more increment to the RHS, both Rear burner
on HIGH ignites (along with the Front burner remaining on HIGH)
Position 4 - Moving the slider as far as possible to the RHS is OFF
Note: There is no "pilot only" setting on the Slider (FS) model.

14.3.3 Turning off.

To turn the fire OFF push the slider as far as possible to the RHS.

14.4 LED fuel effect checks.

14.4.1 Lighting the LED fuel effect.

-
Flick the rocker switch to the ON position which will be
visible by a red marking on the rocker switch and the LED
effect will illuminate and begin pulsing.
14.4.2 Turn off.
To turn the LED fuel effect OFF flick the rocker switch in the opposite direction.
NOTE: The Gas fire and the LED fuel effect can function independant of each other.
© Page 27
GDC Group Ltd. SEPT 2018