09/2013
indication for button YELLOW
button GREEN, configurable
indication for button GREEN
motion sensor
with response delay
door call signalling
(6 bright LEDs integrated)
control microphone sensitivity
control for motion sensor sensitiv-
ity
WE: Factory setting
Find an installation site
The view of the motion sensor to the coverage must not be restricted (e.g. by furniture).
The motion sensor must not be point directly to windows, heatings, solar radiation, open
flames or moving heat sources.
Ensure that no pets are within the coverage, their movements might be detected.
When installing the IMM2500 on a desktop accessory, the motion sensor must be deac-
tivated (off)!
TCS TürControlSysteme AG, TCS Hotline Germany: +49 41 94/ 9 88 11 88
FAX: +49 41 94/ 9 88 129 Mail: hotline@tcsag.de
9
ON: send control function 2,
OFF: send control function 1 (or vice versa,
depending on the configuration)
Blinks: send internal 2
(switching lights: no indication)
call diversion 3 on/off
send control function 8 (=factory setting)
send internal call 1
ON: call diversion activated
Blinks: in case of an incoming internal call
from an assigned indoor station and sending
internal call 1
(control function 8: no indication)
After detecting a longer break in the activity of
the resident within the coverage, a control
function 9 is sent automatically after the de-
termined period of time has run out. When in-
stalling the IMM2500 on a desktop accessory,
the motion sensor must be deactivated (off)!
ON: during a running announcement and
when listen-in
Blinks: in case of an incoming call (from the
front-door, floor or internal)
microphone sensitivity can be adjusted continu-
ously
motion sensor sensitivity can be adjusted con-
tinuously
Installation
Subject to technical changes.
PI_IMM2500
1A