Programming; Legende Zur Programmierung; Basic Principle; Programming The Basic Module - TCS IMM2500 Product Information

09/2013
Legend for programming
Press the button until...
press button shortly
release the button
go on
repeat

Basic principle

Programming the basic and special function module is realised in 4 steps:
1 Initiate the programming
2 Function selection
3 Allocation to button...
4 End the programming
 Initiating the programming is only necessary once at the beginning of the programming
work.
 Only after all programming work is finished the programming should be terminated.

Programming the basic module

1
TCS TürControlSysteme AG, TCS Hotline Germany: +49 41 94/ 9 88 11 88
FAX: +49 41 94/ 9 88 129  Mail: hotline@tcsag.de

Programming

Initiate the programming
Basic module
Press the call OFF-button (8 sec),
until an acknowledgement tone sounds shortly
15
acknowledgement tone
LED blinks slowly
LED flashes
LED is ON
LED is OFF
release
Subject to technical changes.
PI_IMM2500
Module with special
functions
All indication are blink-
ing: indoor station is in
programming mode
1A