Installation; Install The Lower Cover; Connect The Lines; Snap-On The Upper Cover - TCS ISH3022 Product Information

Install the lower cover

 To place the connection lines without any
problems, a flush-mounted socket must be
installed behind the device.
Position the flush-mounted socket below the
cable conduit.
Install the lower cover on three attachment
holes with suitable screws to the wall.

Connect the lines

 Minimise the length of the lines above the
upper cover to place the lines without any
problems and do not clamp the lines when
snapping-on the upper cover.
 Connect the lines according to the labeling:
a b E P (from the buttom to the top), floor
push button at a – E.
Wiring example see page 8.

Snap-on the upper cover

 Put on the upper cover at both adjustment
increments of the lower cover (1).
 Snap on the upper cover below with slight
pressure (2)

Connect the handset

 Plug in the Western connector of the handset
cord into the socket at the underside of the
telephone.
TCS TürControlSysteme AG, TCS Hotline Germany: hotline@tcsag.de
FAX: +49(0) 41 94/ 9 88 129
6

Installation

floor push button
1
2
Subject to technical changes.
PI_ISH3022-uk
11/2012