Assembly; Notes; Flush-Mount Box; Front-Door Station - TCS AVU14 0 Series Product Information

Notes

Flush-mount box

• Feed the connection cable through the cable duct in the flush-mount box and attach it to
the wall using suitable screws.
• The front-door station profile should fit flush with the base.

Front-door station

• Attach the front-door station from the attachment holes to the stud bolts in the flush-
mount box using the hexagonal socket screws supplied.
• Take care not to over-tighten the screws. This would distort the case so that the loud-
speaker cover and name plate glass could no longer be inserted or removed.

Installation location

To achieve a good video quality the camera
must not point directly at:
• sunlight,
• strong sources of light,
• bright or strongly reflecting walls.

Installation height

The installation height for the video front-
door station must be selected under consid-
eration of the field of capture of the camera
(see figure). Persons with average body
height are best captured with an installation
height of 160 cm above floor level.
TCS TürControlSysteme AG • Geschwister-Scholl-Str. 7 • 39307 Genthin
Phone.: +49 39 33 / 87 99 10 • Fax: +49 39 33 / 87 99 11 • www.tcs-germany.com
7

Assembly

3.6 mm lens
90 ° diagonal capture angle
Subject to change without notice.
PI_GB_AVU1_Art0016078_2v0.doc mi
05/2006