Scope Of Delivery; Safety Instructions; General Safety Regulations; Installation - Protective Measures - TCS AVU940x0 Product Information

11/2012
1 x ASU940x0 (incl. flush-mount box)
TM
1 x win:clip key
1 x screwdriver with round-handle
name fields, empty and with light symbol
hexagon socket screws
product information

General safety regulations

Attention! Installation, mounting, commissioning and repair of electrical devices have
!
to be carried out only by qualified electricians. The current standards for the installa-
tion of door communication systems must be observed.
When working in systems with 230 V mains voltage, the safety requirements according to
DIN VDE 0100 must be observed.
When installing TCS:BUS systems, the general safety regulations for telecommunication
systems according to VDE 0800 must be observed. Inter alia:
 separated cabling of heavy and low current lines,
 minimum distance of 10 cm for common cabling,
 use of separators between heavy and low current lines in shared cable ducts,
 use of standard telecommunication lines, e.g. J-Y (St) Y with 0.8 mm diameter,
 existing lines (modernisation) with deviating cross sections can be used in compliance
with the loop resistance.
Installation – protective measures
With suitable requirements to protect against lightning, it has to be ensured that a volt-
!
age of each 32 V DC is not to be exceeded at the connections + and –.
TCS TürControlSysteme AG, www.tcsag.de
TCS Hotline • Mail: hotline@tcsag.de
3

Scope of delivery

(to mount the device in the flush-mount box)

Safety instructions

Subject to technical changes.
PI_AVU940x0-uk