General safety regulations
Attention! Mounting, installation, commissioning and repair of electronic devices have
!
to be carried out only by qualified electricians. Thus, the standards and instructions for
the installation of systems have to be observed.
For working on systems with main connection of 230 V alternating voltage, the safety re-
quirements according to DIN VDE 0100 must be observed.
When installing TCS:BUS systems, the general safety regulations for telecommunication
systems according to VDE 0800 must be observed. Inter alia:
separated conduit of heavy and low current lines,
minimum distance of 10 cm in case of a common conduit,
use of separators between heavy and low current lines within shared cable ducts,
use of standard communication lines, e.g. J-Y (St) Y with 0.8 mm diameter,
existing lines (modernisation) with deviating cross-sections can be used in compliance
with the loop resistance.
Installation – protective meaures
With suitable measures to protect against lightning, it has to be ensured that a voltage
!
of each 32 V DC is not exceeded at the connections a, b, P, R, S (V1, V2).
The communication posts and modules are permitted exclusively for safety extra low
!
voltage (SELV) and protective extra low voltage (PELV).
Functional group with
display module
Display module AMI1010x-00000
TCS TürControlSysteme AG, TCS Hotline Germany: +49 (0) 41 94/ 9 88 11 88
FAX: +49 (0) 41 94/ 9 88 129 Mail: hotline@tcsag.de
4
Safety instructions
Overview of the modules
operating elements
AMI10100-0000 display module LCD graphic, 100 flats
AMI10103-0000 display module LCD graphic, 200 flats
AMI10105-0000 display module LCD graphic, 1000 flats
Subject to technical changes.
PI_K30001-30004_uk 1A
01/2013