Connect The External Push Button; Snap-On The Upper Covers Of The Modules; Open The Device - TCS IMM2500 Product Information

09/2013

Connect the external push button

The connection terminal is located on the PCB
within the upper cover of the module with special
functions.
Via a pluggable screw terminal with 2 pins, an ex-
ternal push button can be connected.
The switch time of the external push button must
be at least 1 second!

Snap-on the upper covers of the modules

1. Place the upper cover at both adjustment in-
crement of the lower cover (1).
2. Place the handset cord correctly within the re-
cess of the upper cover (avoid damages) and
snap-on the upper cover (2)

Open the device

1. There is a rectangular re-
lease openings at the under-
side of the device for each
module. Insert a small
screwdriver (around 7 mm
width) straight and with slight
pressure into this opening.
2. The upper cover can be re-
moved separately at the un-
derside of the device.
3. Lift the upper cover out of
the two upper adjustment in-
crements.
TCS TürControlSysteme AG, TCS Hotline Germany: +49 41 94/ 9 88 11 88
FAX: +49 41 94/ 9 88 129  Mail: hotline@tcsag.de
11
Subject to technical changes.
PI_IMM2500 1A