Programming The Special Functions - TCS IMM2500 Product Information

4
Shortly press the call OFF-button or automatically, if no button is pressed for 30 seconds.

Programming the special functions

 By programming the button, the prior function is overwritten automatically. A previous
deletion of the button is not necessary.
 The programming can be realised manually or via the configuration software configo
1
TCS TürControlSysteme AG, TCS Hotline Germany: +49 41 94/ 9 88 11 88
FAX: +49 41 94/ 9 88 129  Mail: hotline@tcsag.de
End the programming
Initiate the programming
Press the call OFF-button (8 sec),
until an acknowledgement tone sounds shortly
18
release
Module with special functions
all indication are OFF
Module with special functions
all indication are blinking:
indoor station is in
programming mode
Subject to technical changes.
PI_IMM2500 1A
09/2013
TM
.