Train Radio Sensors - TCS IMM2500 Product Information

09/2013

Train radio sensors

1
Press the call OFF-button (8 sec),
until an acknowledgement tone sounds shortly
Initiate the train mode
Train radio sensor
Delete radio sensor
Training mode ends
automatically
TCS TürControlSysteme AG, TCS Hotline Germany: +49 41 94/ 9 88 11 88
FAX: +49 41 94/ 9 88 129  Mail: hotline@tcsag.de
21
Initiate the programming
Basic module
4 sec
4 sec
Module with special functions
release
All indication are blinking
indoor station is in
programming mode
 Press the button RED (for
around 4 sec),
only the indication for button
RED blinks: Special function
module is in training mode.
 Shortly press the button of the
radio sensor which should be
trained.
 Indication for button RED is
ON for around 4 sec, then
blinking again.
 Shortly press the button RED.
 All indication are blinking.
Special function module is in
programming mode again,
training mode is off.
 Press the button RED (for
around 4 sec),
indication for button RED
blinks: Special function module
is in training mode.
 Shortly press the button of the
radio sensor which should be
deleted.
 Indication for button RED is
OFF for around 4 sec, then
blinking again.
 All indication are blinking
again.
Special function module is in
programming mode again.
Subject to technical changes.
PI_IMM2500 1A