Table of Contents
Advertisement
Additional functions
Name plate illumination
Connection
Allocation of serial number to
bell buttons
additional switching signal
Installing the video front-door station
Installation location
To achieve a good video quality the camera
must not point directly at:
• sunlight,
• strong sources of light,
• bright or strongly reflecting walls.
Installation height
The installation height for the video front-
door station must be selected under consid-
eration of the field of capture of the camera
(see figure). Persons with average body
height are best captured with an installation
height of 160 cm above floor level.
TCS TürControlSysteme AG • Geschwister-Scholl-Str. 7 • 39307 Genthin
Phone.: +49 39 33 / 87 99 10 • Fax: +49 39 33 / 87 99 11 • www.tcs-germany.com
7
Via LED, P-wire connection required.
• for Service Device
• for connection for bell button extension PET/PDT
• for protection ground
2
Use a combining device BRE2.
Assembly
3.7 mm lens
90 ° diagonal capture angle
Subject to change without notice.
PI_GB_VPES_VPDS_Art0016079_2v0.doc mi
05/2006
Advertisement
Table of Contents
