Input 1-4; Freeze; Crosspoint - Datavideo HS-1300 Instruction Manual

Input 1-4

By selecting the corresponding input (Inputs 1-4), the user will then be allowed to configure the colour of
the inputs 1-4 by adjusting its Black Level, White Clip and Chroma Gain parameters.

Freeze

"Freeze" allows the user to load either an image or a live video to Inputs 1-6 by selecting one of the
sources listed as follows:
 Still: Once selected, still images will be displayed in the corresponding input windows (Inputs 1-6).
See Stills of the OSD menu for instructions on loading still images to Inputs 1-6.
 Freeze: This option freezes the live video being played in the corresponding input windows (Inputs
1-6).
 Live: By selecting Live, you will be able to view playback of the corresponding live video or camera
image of the corresponding input ports.
Video source connected to the SDI 1 Input port will be displayed in Input 1 window.
Video source connected to the SDI 2 Input port will be displayed in Input 2 window.
Video source connected to the SDI 3 Input port will be displayed in Input 3 window.
Video source connected to the SDI 4 Input port will be displayed in Input 4 window.
Video source connected to the HDMI 1 Input port will be displayed in Input 5 window.
Video source connected to the HDMI 2 Input port will be displayed in Input 6 window.

Crosspoint

The crosspoint function allows the user to shuffle the contents of Inputs 1-6 without changing the physical
hardware connections at the back of the machine, or even assign multiple inputs to the same source. For
example, the user is allowed to assign the input 2 video source to input 1, after which the input 2 video will
also be displayed on the input 1 window.
Follow the steps below to cross appoint your video sources.
1. Press the MENU button on the control panel to open OSD menu, then go to the Inputs sub menu where
you will be able to find the Crosspoint function.
2. For example, to display video from SDI 2 input port in input window 1, in option 1, select Input 2.
Inputs
3. Check your Multiview monitor, you should be able to see video from SDI 2 input port being played in
input window 1.
4. Depending on your application, cross point the rest of video sources accordingly.
Input 1 Black
Input 2 Black
Input 3 Black
Input 4 Black
Freeze 1
4
Crosspoint 1
4
0% White
0% White
0% White
0% White
Still 2
Still 5
Input 2 2
Input 4 5
38
100% Chrom
100% Chrom
100% Chrom
100% Chrom
Live 3
Still 6
Input 2 3
Input 5 6
1.0
1.0
1.0
1.0
Still
Live
Input 3
Input 6