Chapter 5 Video Streaming; Streaming Network Connection And Device Search; Connecting To A Dhcp Network (Dhcp Mode); Connecting To A Non-Dhcp Network (Static Ip) - Datavideo HS-1300 Instruction Manual

Chapter 5
The HS-1300 Portable Video Studio includes a built-in Video Streaming Server (NVS-31) allowing the user
to stream and record your program at the same time. From any SDI/HDMI input sources, the Datavideo's
video streaming server generates an H.264 encoded stream that is compliant with RTSP or RTMP(S)
protocols. While encoding the video at bit rates appropriate for live streaming, the Datavideo NVS-31
concurrently records a high-quality MP4 file to an SD card.
Note: The built-in video streaming server and recording device are referred to as NVS-31.

5.1 Streaming Network Connection and Device Search

This section details how to connect the NVS-31 to a network with or without a DHCP server, and describes
how to acquire the NVS-31's IP address.

Connecting to a DHCP Network (DHCP Mode)

Follow the following procedure to scan your DHCP network for connected NVS-31 devices.
Note: The NVS-31 will be automatically assigned an IP address upon connection to the DHCP network.
1. Connect the NVS-31's stream port to the network via an Ethernet cable.
2. Turn on the HS-1300's power and the NVS-31 will also be turned ON in the DHCP mode by
default.
3. Connect the laptop to the same network that the NVS-31 is connected to and download the free IP
Finder utility program.
4. Double click the IP Finder utility program icon to open the IP Finder interface.
5. Click the SCAN button to start searching for connected devices.

Connecting to a NON-DHCP Network (Static IP)

Upon connection to a non-DHCP network, the NVS-31 will not be assigned of any IP addresses. As such it is
recommended that you manually assign a fixed IP address to the device or use the default IP address
(192.168.1.60).
Video Streaming
44