Border; Border Width; Crop; P-In-P - Datavideo HS-1300 Instruction Manual

Hd 6 channelportable video streaming studio
Hide thumbs Also See for HS-1300:
Table of Contents

Advertisement

Negative value: position the P-in-P window to the left.
Zero value: position the P-in-P window at the center.
Y-Value
Positive value: move the P-in-P window up.
Negative value: move the P-in-P window down.
Zero value: position the P-in-P window at the center.
Size
Ranges from 0 to 100 with 1% being the smallest and 100 being the largest. So 50% would
represent a P-in-P window which is half the size of the background image. 100% would see
the PIP image totally cover the background image unless offset to one side.

Border

P-in-P window border color can be set by adjusting the Luma, Saturation and Hue values. Luma and
Saturation have a range between 0-100% and Hue lies between 0-355.

Border Width

The "Width" sub-option adjusts the border width. A width of zero (0) will turn the P-in-P window border
off.

Crop

The P-in-P window crop can be adjusted by modifying the following parameters:
 Left – Adjusts the position of the left edge of the P-in-P window.
 Right – Adjusts the position of the right edge of the P-in-P window.
 Size – Adjusts the P-in-P window crop size.
 Top – Adjusts the position of the top edge of the P-in-P window.
 Bot – Adjusts the position of the bottom edge of the P-in-P window.

P-in-P

In this option, the user is allowed to switch between FINE and NORMAL modes. In FINE mode, the
parameters X, Y and Size can be fined tuned with step size 0.1. In NORMAL mode, the parameters X, Y and
Size are adjusted with step size 1.

P-in-P Lite

P-in-P Lite sub menu allows the user to adjust related P-in-P parameters EXCEPT its vertical position and
the P-in-P window size. Use this option menu if the user selects P-in-P Lite in the Keyer option. "P-in-P
Keyer" option indicates the keyer enabled for P-in-P Lite. In our example below, the Key 1 keying effect will
be applied to the P-in-P Lite window.
Please note that the "P-in-P Keyer" can only be changed in the Keyer sub menu.
Advanced Mode = Basic Mode
P-in-P Lite
P-in-P Keyer
Position
X
Border
Luma
Width
Crop
Left
Key 1
-22%
100% Sat
2%
32% Right
36
80% Hue
22% Size
0
0%

Advertisement

Table of Contents
loading

Table of Contents