Audio Menu Options - Monitoring The Audio Levels; Audio Menu Options - Changing The Audio Input Level - Datavideo HS-2850 Instruction Manual

An external audio mixer is not required. If you just want to work with SDI / HDMI
embedded audio, it is NOT necessary to physically connect the switcher's XLR outputs with
the XLR inputs 1 and 2 to re-embed the audio again; simply adjust the corresponding
settings using the OSD menu.
5.3 Audio Menu Options – Monitoring the audio levels
The HS-2850 can confirm the incoming audio levels by showing audio peak meters on the
HDMI multi-view. See
It is also possible to hear the preview or program audio from the multi-view HDMI outputs
using the menu option below.
Multi-Screen Audio
Indicators
5.4 Audio Menu Options – Changing the audio input level
The HS-2850 can change the incoming audio level on the video inputs by adjusting the
following menu option.
Level
AUDIO DELAY
Nominal
The audio level can also be changed at the external audio mixer if one is used.
Section 3.7 Multiview Layout
Multi-Screen Audio Indicators
Tick selection for ON or OFF
On Preview Audio Level and Delay
Range +60 to -60
Range 0 to 16
Resets value to 00
Tab.
60