Formatting The Sd Card - Datavideo HS-1300 Instruction Manual


Reboot the HS-1300

As the HS-1300 boots, the STREAM button turns solid red then press and hold the RECORD and
STREAM buttons simultaneously; release them when the two buttons start flashing red color.

The NVS-31 starts erasing files of the previous update and uses the previously uploaded file to
force the firmware update.

When the RECORD and STREAM buttons turn solid white, the firmware update is complete.

Formatting the SD Card

You are also allowed to format the SD card on the HS-1300. Follow the steps below to format your SD card.

Insert the SD card into the HS-1300's SD card slot.

Login the NVS-31 web interface then click the Storage tab to open the storage interface.

Select the disk storage format from the Storage Format drop-down list.

Click the Format Storage Disk button to start SD card formatting. The format is complete when the
progress bar reaches 100%.
108