Save Still; Grab Still; Freeze; User Mems - Datavideo HS-1300 Instruction Manual

 Input 5
 Input 4
 Input 3
 Input 2
 Input 1
Select "Load" to load the still image to the determined destination.
Image Preview is available below the "Load Still" row. "Image Preview – 1" allows the user to preview the
previous image, "Image Preview" displays the image that will be loaded when "Load" is selected, and
"Image Preview + 1" shows the next image.

Save Still

"Save Still" allows the user to save the still image to a specific memory location. The user should
determine the source of the still image first. The available sources are listed below:
 Input 6
 Input 5
 Input 4
 Input 3
 Input 2
 Input 1
To complete the save, the user can simply select "Save" after determining the memory location.

Grab Still

In this option, select "Grab" to capture the current program view and save it to Grab Destination (Input 1
to Input 6).

Freeze

"Freeze" allows the user to load an image to Inputs 1-6 from one of the sources listed as follows:
 Clip
 Still
 Freeze
 Live

User Mems

In the User Mems sub menu, the user is allowed to load previously saved settings and save the currently
configured settings.
Advanced Mode = Basic Mode
User Mems

Load Memory

Use the up/down arrow to scroll to the desired memory location (1-999) and load the saved setting by
selecting "Load". The user can also press one of the USER memory shortcut buttons (1-6) on the control
panel as a quick way of loading those previously saved User configurations.
Load Mem Memory
Save Mem Memory
Load Clip
Thumbnail Clip – 1
Clear Clip
1
1
Load Clip
Thumbnail Clip
Delete Clip
41
Load
Save
1
Thumbnail Clip + 1