Table of Contents
Advertisement
5.4 Stream and Record Buttons
Before you start reading this section, first check the streaming button row located to the right of the SD
card slot. If your HS-1300 is a four button model, feel free to skip the two button section.
Two Button Model
Solid White
Record function in idle state
Record function is activating or
Blinking Red
resetting
Solid Red
Record function activated
Record Button
Press the RECORD button to start/stop recording.
Start recording
When idle, the RECORD button is solid white.
Press and hold the RECORD button for approximately 2 seconds.
When the record function is activating, the RECORD button turns from solid white, then blinking
red and finally to solid red.
When the RECORD button is solid red, this indicates that the record function has been successfully
activated.
Note: The RECORD button is disabled in the Stream Only mode.
Stop recording
While recording, the RECORD button is solid red.
Press and hold the RECORD button for approximately 2 seconds.
When the record function is terminating, the RECORD button turns from solid red, then blinking
red and finally to solid white.
When the RECORD button is solid white, this indicates that the record function has been
successfully terminated.
Stream Button
Press the STREAM button to start/stop streaming.
Start streaming
When idle, the STREAM button is solid white.
Press and hold the STREAM button for approximately 2 seconds.
When the stream function is activating, the STREAM button turns from solid white, then blinking
red and finally to solid red.
The RECORD and STREAM buttons on the front panel of the HS-1300 give
the user certain controls of the record and stream functions. In this section,
we will cover operations of these two buttons in detail. Button LED
behaviors and their corresponding states are listed in the table below:
RECORD Button
STREAM Button
Stream function in idle state
Stream function is activating or
resetting
Stream function activated
76
Advertisement
Table of Contents
Troubleshooting
