Table of Contents
Advertisement
Save Memory
Use the up/down arrow to scroll to the desired memory location and save the current setting by selecting
"Save"
Load Clip
Before loading the clip, the user should first choose the clip location where the video clip is saved. The
following are the buffer destinations to which the video clip can be loaded:
Input 6
Input 5
Input 4
Input 3
Input 2
Input 1
Select "Load" to load the selected video clip to the configured destination.
Clip Preview is available below the "Load Clip" row. "Thumbnail Clip – 1" allows the user to preview the
previous clip, "Thumbnail Clip" displays the clip that will be loaded when "Load" is selected, and
"Thumbnail Clip + 1" shows the next clip.
To clear the loaded clip from the buffer, simply select "Clear Clip." To remove clip from a memory location,
select "Delete Clip."
Setup
In the "Setup" sub menu, the user can change the resolution, switch between full and simplified menu
versions, adjust the menu preferences, enable/disable Auto Save, reset the machine to its Factory Default
settings, choose the preferred OSD menu language, upgrade firmware and view the current firmware
versions (Interface, Mainboard and Keyboard).
Setup
Audio Level (EBU/SMPTE/AUTO)
There are two different audio standards available for the user to select. The user can either select the EBU
or SMPTE standard. By selecting AUTO, the device will be allowed to automatically detect the audio
standard.
Menu Preference
In menu preference, the user is allowed to set the menu color, menu transparency level, menu size and the
display position.
Menu color: the available colors are blue and grey
Options of Menu Transparency are listed below:
0: No Transparency
Standard
Audio
Level
Menu Mode
Menu Pref
Menu Pos
Auto Save
Factory Def
Language
HS-1300
S/W: v1.4.0.1
1080i/59.94
Save Setup
Auto
Advanced
Blue
Transp
Centre
On
Restore
Restr Names
English
F/W: 2017-08-14
42
1 Size
Normal
Network Def
KBD: v2.27
Advertisement
Table of Contents
Troubleshooting
