Table of Contents
Advertisement
Solid red STREAM button
Solid white STREAM button
The two buttons turn solid white a few seconds after displaying the operation mode.
Note: The order of the operation mode change is Stream & Record Stream Only Record Only
Four Button Model
Button LED behaviors and their corresponding states are listed in the table below:
Record function in idle
Solid White
state
Record function is
Blinking Red
activating or resetting
Solid Red
Record function activated
Record Button
Press the RECORD button to start/stop recording.
Start recording
When idle, the RECORD button is solid white.
Press and hold the RECORD button for approximately 2 seconds.
When the record function is activating, the RECORD button turns from solid white, then blinking
red and finally to solid red.
When the RECORD button is solid red, this indicates that the record function has been successfully
activated.
Note: The RECORD button is disabled in the Stream Only mode.
Stop recording
While recording, the RECORD button is solid red.
Press and hold the RECORD button for approximately 2 seconds.
When the record function is terminating, the RECORD button turns from solid red, then blinking
red and finally to solid white.
When the RECORD button is solid white, this indicates that the record function has been
successfully terminated.
Solid red RECORD button
Stream & Record
Record Only Mode
The RECORD, STREAM, RECORD+STREAM and BITRATE buttons on the front panel
of the HS-1300 give the user certain controls of the record and stream functions. In
this section, we will cover operations of these two buttons in detail.
RECORD Button
STREAM Button
Stream function in idle state
Stream function is activating
or resetting
Stream function activated
78
Solid white RECORD button
Stream Only Mode
None
RECORD+STREAM Button
Record/Stream functions in
idle state simultaneously
Record/Stream functions
are activating or resetting
simultaneously
Record/Stream functions
are activated
simultaneously
Advertisement
Table of Contents
Troubleshooting
