Table of Contents
Advertisement
3. In the Load Clip sub-option, first select the clip that you would like to load. The Clip Preview is
shown in the row right below the Load Clip row.
4. Select Load to load the clip to the CH6 window. The load progress prompt "Loading Clip XX/XX ..."
will appear. Once loaded, the previously displayed video or image will be replaced.
Note: The load process can take up to tens of seconds.
5. To enable the Clip or Stinger transition mode, please press the MIX and WIPE buttons at the same
time.
Restoring CH6 window for Live or Still mode
If the Clip transition is no longer needed, you may free up the CH6 window for other modes of use such as
Still and Live. Follow the steps outlined below to re-configure the CH6 source.
1. Press the MENU button to open the OSD menu on the Multiview display.
2. Open the User Mems sub menu as shown below.
User Mems
3. Select Delete Clip to clear the clip buffer (CH6).
4. Exit the User Mems sub menu.
5. Open the Inputs sub menu as shown below.
Inputs
6. Select the Freeze option and set CH6 to Live or Still.
Importing the Clip for Stinger Transition Effect from the PC
On the HS-1300, you will be able to add a clip between sources. Besides using the existing clips on the
machine, you are also allowed to import your own clip (a series of bmp/png/jpg/pic files) to the HS-1300
from the PC using the Switcher Image Import/Export utility, which can be downloaded from the HS-1300
product page.
First connect the HS-1300 to a Windows computer using an RJ-45 Ethernet cable.
Load Mem
Memory
Save Mem
Memory
Load Clip
Thumbnail Clip - 1
Input 1
Black
Input 2
Black
Input 3
Black
Input 4
Black
Freeze
1
4
Crosspoint
1
4
13
13
Load
Clip
Thumbnail Clip
Clear Clip
Delete Clip
0% White
0% White
0% White
0% White
Still 2
Still 5
Input 1 2
Input 4 5
89
Load
Save
0
Thumbnail Clip + 1
100% Chrom
100% Chrom
100% Chrom
100% Chrom
Live 3
Still 6
Input 2 3
Input 5 6
1.0
1.0
1.0
1.0
Still
Live
Input 3
Input 6
Advertisement
Table of Contents
Troubleshooting
