Keyer Source; Pip Effect; Background Transition & Grab; Wipe Border Setting - Datavideo HS-1300 Instruction Manual

Keyer Source

PIP Effect

Background Transition & GRAB

Wipe Border Setting

Wipe Transition Selection

Selection of Keyer Source from Program / Preset Row
Keep holding down one of these buttons to enter key select mode and
fill select mode. Select key source from the Program row and fill source
from the Preset row.
The selected source button will flash.
KEYER SETUP
Press this button to open Keyer configuration sub menu on the Multi
view output. The opened configuration menu allows you to set the
selected keyer (Key 1/Key 2/DSK 1/DSK 2).
Note: See Keyer
DSK AUTO
Auto DSK transition function either transitions "DSK 1 or DSK 2
individually" or transitions "DSK 1 and DSK 2 simultaneously"
PIP enables the PIP key mode
PIP LITE enables the PIP LITE key mode
TRANS BG enables Background Transition between Program / Preset
GRAB grabs the current Program video image to Input 6.
BDR ON/OFF turns the WIPE border function ON/OFF
BDR SOFT configures the WIPE border softness
BDR COLOR selects the WIPE border color
BDR SIZE adjusts the WIPE border thickness
WIPE Transition Selection
The HS-1300 has 8 user defined wipe buttons that allow the user to select WIPE
transition effect directly from the control panel.
The REV button reverses the direction of the selected WIPE.
All wipes can have an optional colour border applied. The wipe border width and
for each key setup.
14