Table of Contents
Advertisement
Video Streaming Server
You should first visit the official product page
you can download the latest firmware file. Then follow the steps outlined below to update the device
firmware.
1. Login the NVS-31 web interface, then click the System tab to open the system configuration page.
2. Scroll down to Firmware Update then click the Browse button to search for the latest firmware file on
the PC's hard disk.
3. After double clicking the firmware file, you will see the loading prompt as shown below, indicating that
the file is being uploaded to the NVS-31.
4. After the file has been successfully uploaded, you will see a file upload success message. Click the
Update button to start the firmware update process.
5. The device will reboot itself after it is updated successfully.
Note: If the device is recording or streaming, you must turn them off before initiating the firmware
update.
Recovery Mode
If power outage is experienced while the firmware is being updated and the NVS-31 becomes inaccessible
due to incomplete update or corrupt files, you may reboot the HS-1300 then activate the recovery mode to
restore the device functionality. Follow the steps below to enter the recovery mode.
https://www.datavideo.com/tw/product/HS-1300
107
where
Advertisement
Table of Contents
Troubleshooting
