Stream Button; Record+Stream Button; Bitrate Button - Datavideo HS-1300 Instruction Manual

Stream Button

Press the STREAM button to start/stop streaming.
Start streaming
 When idle, the STREAM button is solid white.
 Press and hold the STREAM button for approximately 2 seconds.
 When the stream function is activating, the STREAM button turns from solid white, then blinking
red and finally to solid red.
 When the STREAM button is solid red, this indicates that the record function has been successfully
activated.
Note: The STREAM button is disabled in the Record Only mode.
Stop streaming
 While streaming, the STREAM button is solid red.
 Press and hold the STREAM button for approximately 2 seconds.
 When the stream function is terminating, the STREAM button turns from solid red, then blinking
red and finally to solid white.
 When the STREAM button is solid white, this indicates that the stream function has been
successfully terminated.

Record+Stream Button

Start recording/streaming simultaneously
 When idle, the RECORD+STREAM button is solid white.
 Press and hold the RECORD+STREAM button for approximately 2 seconds.
 When the record and stream functions are activating simultaneously, the RECORD+STREAM button
turns from solid white, then blinking red and finally to solid red.
 When the RECORD+STREAM button is solid red, this indicates that the record and stream functions
have been successfully activated.
Stop recording/streaming simultaneously
 While recording and streaming simultaneously, the RECORD+STREAM button is solid red.
 Press and hold the RECORD+STREAM button for approximately 2 seconds.
 When the record and stream functions are terminating, the RECORD+STREAM button turns from
solid red, then blinking red and finally to solid white.
 When the RECORD+STREAM button is solid white, this indicates that the record and stream
functions have been successfully terminated.

Bitrate Button

Follow the steps below to switch the stream bitrate mode using the BITRATE button:
 Press and hold one of the RECORD+STREAM button, the RECORD button, and the STREAM button
until the pressed button starts blinking red.
 Continue holding down one of the RECORD+STREAM button, the RECORD button, and the STREAM
button while pressing the BITRATE button to switch stream bitrate mode (H, M or L).
79