Position; Border; Crop; P-In-P Lite - Datavideo HS-1300 Instruction Manual

Position

The user can adjust the horizontal position of the P-in-P window by adjusting the X value.
 Positive X value positions the P-in-P window to the right.
 Negative X value positions the P-in-P window to the left.
 Zero X value positions the P-in-P window at the center.

Border

P-in-P window border color can be set by adjusting the Luma, Saturation and Hue values. Luma and
Saturation range from 0-100%, whereas Hue ranges from 0-355. The "Width" sub-option adjusts the
border width. A width of zero (0) will turn the P-in-P window border off.

Crop

The P-in-P window crop can be adjusted by modifying the following parameters:
 Left – Adjusts the position of the left edge of the P-in-P window.
 Right – Adjusts the position of the right edge of the P-in-P window.
 Size – Adjusts the P-in-P window crop size.
 Top – Adjusts the position of the top edge of the P-in-P window.
 Bot – Adjusts the position of the bottom edge of the P-in-P window.

P-in-P Lite

In this option, the user is allowed to switch between FINE and NORMAL modes. In FINE mode, the
parameters X can be fined tuned with a step size of 0.1. In NORMAL mode, the parameters X is adjusted
with a step size of 1.

Inputs

This feature allows the user to configure the color of the Inputs 1-4. In addition, the user can shuffle the
contents of Inputs 1-6 without changing the hardware connections at the back of the machine. The user
can also select the input source from Clip, Still, Freeze and Live.
Advanced Mode
Inputs
Basic Mode
Inputs
Top
P-in-P Lite
Input 1 Black
Input 2 Black
Input 3 Black
Input 4 Black
Freeze 1
4
Crosspoint 1
4
Freeze 1
4
Crosspoint 1
4
2% Bot
Fine
0% White
0% White
0% White
0% White
Still 2
Still 5
Input 1 2
Input 4 5
Still 2
Still 5
Input 1 2
Input 4 5
37
24%
100% Chrom
100% Chrom
100% Chrom
100% Chrom
Live 3
Still 6
Input 2 3
Input 5 6
Live 3
Still 6
Input 2 3
Input 5 6
1.0
1.0
1.0
1.0
Still
Live
Input 3
Input 6
Still
Live
Input 3
Input 6