Rear Panel T3Awg3354/T3Awg3254 And Rear Panelt3Awg3358/T3Awg3258; External Modulation Input Connector - Teledyne T3AWG3K Series Operator's Manual

Rear Panel T3AWG3354/T3AWG3254 and
Rear PanelT3AWG3358/T3AWG3258
•
Ref Clk In: 5 to 100 MHz
•
10 MHz Ref Clock Output
•
External Modulation Input
•
Sync OUT / Sync IN Connectors
(T3AWG3358/3258 only)

External Modulation Input Connector

The T3AWG-3K has an input connector to receive an external analog signal that is used as modulating
source. When the selected Run Mode is "Modulation" and the source is "External" the instrument will
use this signal to modulate the carrier waveform.
For the specification please refer to the Auxiliary Channels section.
The connector type is a SMA.
Operator's Manual Simple AFG Application
Digital Output Connectors:
Pod D, Pod C, Pod B, Pod A (T3AWG3358/3258)
Pod B, Pod A (T3AWG3354/3254)
•
DVI port
•
VGA Out port
•
PS/2 Mouse &
Keyboard ports
•
2 DP ports
•
2 USB 2.0
•
4 USB 3.0 ports
•
1 Ethernet port
•
Audio IN/OUT ports
•
2 slots for
Removable SSD
24