Import From File - Teledyne T3AWG3K Series Operator's Manual

Import from File

The Import page allows to load a waveform from a file and assign it to the Carrier waveform or to the
Modulation profile or to the Sweep profile. This page opens by touching the Import button
Once the waveform has been imported it will be available by choosing "Arbitrary" as waveform type for
the Carrier/Modulating/Sweep of the channel. For example, if the "Cosine.txt" is imported and assigned
as "Carrier Wave" for the channel 1 than the imported waveform can be selected by choosing
"Arbitrary" as carrier waveform type of the channel 1.
To switch between channels, you can touch a channel button
the keyboard.
Graph
Area
Import File Specifications
Accepted Formats
Length Range
Offset and Amplitude
Range
Description
.txt (Tab Separated text ), .csv(Comma Separated Value), .trc (LeCroy
Digital oscilloscope)
Between 2 and 16384 samples. The instrument memory is limited at
16 k sample (16384) for each arbitrary waveform If a longer
waveform is imported it will be resampled to match the maximum
length.
When a waveform is imported from a file its original amplitude and
offset are lost because the waveform in normalized during the
importing process. Anyway the amplitude and offset of the
Operator's Manual Simple AFG Application
or press "CHANNEL SEL." button on
.
Waveform
List
Button Area
65