Auxiliary Channels; Marker Out - Teledyne T3AWG3K Series Operator's Manual

Auxiliary Channels

Marker Out

The Marker Out generates a digital pulse synchronous with the waveform or with the modulating
function depending on the Run Mode. To set the Marker Out parameters refer to the Channel Settings.
Marker Out Specification Value
Connector
Output impedance
Output level (into 50 Ω)
1 BNC per pair of channels on the Front Panel
50 Ω
1 V to 2.5 V
Marker out (blue, top) synchronous with the analog signal (red, bottom)
Operator's Manual Simple AFG Application
40