Device Setting
Reference
Clock
Ext. Ref.
Clock[Mhz]
Trigger IN
Marker Out
Device Settings: Eight Channels Model
Operator's Manual Simple AFG Application
Description
It can be Internal or External. If it is
Internal the DAC sampling clock is
generated internally. If it is External the
DAC sampling clock is synthesized starting
from the external clock source provided to
to the External Reference SMA connector
located in the rear panel. The external
reference clock frequency must me
specified in the Ext. Ref. Clock[Mhz]
parameter.
This textbox define the External Reference
Clock frequency in Mhz. This parameter
has effect only if the Reference Clock is set
on External.
Use this group of parameters to define the
Trigger In behaviour (see the table below).
Use this group of parameters to define the
Marker Out behaviour (see the table
below).
61