Throttle Body Installation - Suzuki TU250X Service Manual

THROTTLE BODY INSTALLATION

Install the throttle body in the reverse order of removal.
Pay attention to the following points:
• Fit the projection on the throttle body in the depression of the
intake pipe.
• Position the throttle body clamps correctly. (10-20)
• Loosen each throttle cable lock-nut 1.
• Turn in each throttle cable adjuster 2 fully and locate each
outer cable 3 so that the clearance is 0 mm (0 in).
• Tighten each lock-nut 1.
• Adjust the throttle cable play. (2-8)
• Route the fuel feed hose and wiring harness properly.
(10-12, -13, -20)

After installed throttle body, perform the TP learned
value reset with SDS tool. (4-40)
FUEL SYSTEM AND THROTTLE BODY 5-17
0 mm
(0 in)
0 mm
(0 in)