Suzuki TU250X Service Manual page 107

3-60 ENGINE
• Install the gearshift cam stopper No.2 3, spring 4 and gear-
shift cam stopper plug 5.
 Gearshift cam stopper plug:
GENERATOR
• Install the washer 1.
NOTE:
The chamber side A of washer faces inside.
• Apply engine oil to the bearing 2 and install it.
• Install the starter driven gear 4 onto the starter clutch 3.
• Degrease the tapered portion B of generator rotor and also
the crankshaft C. Use nonflammable cleaning solvent to wipe
off oily or greasy matter and make these surfaces completely
dry.
• Install the key 5.
23 N·m (2.3 kgf-m, 16.5 lbf-ft)