8-58 CHASSIS
INSTALLATION
Install the swingarm in the reverse order of removal. Pay atten-
tion to the following points:
• Tighten the swingarm pivot nut to the specified torque.
Swingarm pivot nut: 65 N·m (6.5 kgf-m, 47.0 lbf-ft)
• Tighten the rear shock absorber nuts (lower) to the specified
torque.
Rear shock absorber nut: 29 N·m (2.9 kgf-m, 21.0 lbf-ft)
• Install the rear wheel. (8-52)
FINAL INSPECTION AND ADJUSTMENT
After installing the rear suspension and wheel, the following
adjustments are required before driving.
* Drive chain (2-13)
* Rear brake (2-17)
* Chassis bolts and nuts (2-22)
* Rear suspension (2-20)