Suzuki TU250X Service Manual page 255

• Remove the steering stem upper bracket 6 by removing the
steering stem head bolt and washer.
NOTE:
Place a clean rag on the fuel tank to prevent the fuel tank
scratched.
• Remove the steering stem nut with the special tool.
 09940-14911: Steering stem nut socket wrench
• Remove the steering stem lower bracket 7.

When removing the steering stem nut, hold the steer-
ing stem lower bracket to prevent it from falling.
• Remove the dust seal 8 and upper bearing inner race 9.
• Remove the steering stem upper bearing 0 and lower bear-
ing A.
• Remove the ignition switch B with the special tools, if neces-
sary.
 09930-11920: Torx bit (JT40H)
09930-11940: Torx bit holder
CHASSIS 8-35