Suzuki TU250X Service Manual page 140

MOTORCYCLE/ENVIRONMENTAL CONDITION WHEN PROBLEM OCCURS
Weather
Fair
Temperature Hot
Frequency
Always
Under certain condition
Road Urban
Tarmacadam
Engine condition Cold
Immediately after start
Motorcycle con-
During driving:
dition
Right hand corner
At stop
Other
NOTE:
The above form is a standard sample. The form should be modified according to conditions and characteris-
tics of each market.
VISUAL INSPECTION
• Prior to diagnosis using the mode selection switch or SDS, perform the following visual inspections. The
reason for visual inspection is that mechanical failures (such as oil leakage) cannot be displayed on the
screen with the use of mode selection switch or SDS.
* Engine oil level and leakage (2-10)
* Fuel level and leakage
* Clogged air cleaner element (2-4)
* Battery condition (9-39)
* Throttle cable play (2-8)
* Broken fuse
* FI indicator light operation (4-15, 9-27)
* Speedometer operation
* Exhaust gas leakage and noise (6-4)
* Each coupler disconnection
Environmental condition
Cloudy Rain Snow
Warm Cool Cold (
Sometimes ( times/
Suburb Highway
Gravel Other
Motorcycle condition
Warming up phase
Racing without load
Constant speed
Left hand corner
Motorcycle speed when problem occurs (
Always Other
°C) Always
day, month)
Mountainous ( Uphill
Warmed up Always
Engine speed (
Accelerating Decelerating
FI SYSTEM DIAGNOSIS 4-19
Only once
Downhill)
Other at starting
r/min)
km/h)