Suzuki TU250X Service Manual page 334

10-14 SERVICING INFORMATION
160 N . m (16.0 kgf-m, 115.5 lbf-ft)
*4
1 Generator lead wire
2 Battery - terminal
3 Clamp
4 Neutral switch
5 CKP sensor
6 Stator coil
7 Stator coil lead wire
8 Clamp
*1
9 Generator cover
*1 Pass the generator lead wire inside of the breather hose.
*2 Contact the battery - terminal onto the crankcase.
*3 Bent the oil seal retainer.
Pass the stator coil lead wire between the boss and rib.
*4
Do not pinch the stator coil lead wire with the clamp, boss and rib.
Do not pinch the stator coil lead wire with the boss of generator
*5
cover and CKP sensor.
*2
0 ± 10˚
*3
*5