Installation - Suzuki TU250X Service Manual

3-8 ENGINE

INSTALLATION

Install the engine in the reverse order of engine removal. Pay attention to the following points:
• Fit the swingarm in its position and hold it with the swingarm pivot shaft.
• Mount the engine on the frame.
• Tighten the engine mounting nuts and swingarm pivot nut to the specified torque.
NOTE:
* The engine mounting nuts and swingarm pivot nut are self-locking. Once the nuts have been removed,
they are no longer of any use.
* The engine mounting nuts and swingarm pivot nut are located at the right side of motorcycle.
65 N . m
(6.5 kgf-m, 47.0 lbf-ft)
BOLT LENGTH
a 67 mm (2.6 in)
b 105 mm (4.1 in)
41 N . m
(4.1 kgf-m, 29.5 lbf-ft)
c 50 mm (2.0 in)
d 246 mm (9.7 in)
40 N . m
(4.0 kgf-m, 29.0 lbf-ft)
41 N . m
(4.1 kgf-m, 29.5 lbf-ft)
28 N . m
(2.8 kgf-m, 20.0 lbf-ft)