Avaya S3210R Manual page 64

Getting Started
Home > Administration > Administering remote machines
Analog Test
This topic provides information on testing connectivity to analog remote machines. You should perform this test
as part of acceptance testing after you perform initial administration.
To test connectivity between the Message Networking system and an analog remote machine:
1. Start at the Message Networking Administration menu, and select Remote Machine Administration >
Test Connections > Analog Test.
The system displays the Analog Test page.
2. From the Remote Machine Name menu, select the name of the remote machine to which you want to test
the connection.
3. Click Test.
The system displays the results of the test:
If the screen contains a message stating that the connection was successful, proceed to the next
"
step.
If the screen contains a message stating that the test failed, verify that the remote machine is
"
administered correctly.
4. Click Return to Main to return to the Administration menu.
The following buttons appear at the bottom of this page:
Back: Click this button to return to the Test Connections page.
!
Return to Main: Click this button to return to the Administration menu.
!
Help: Click this button to get information about this page.
!
Top of page
Message Networking Help
Admin Maintenance
> Testing connections > Analog Test
Home | Search
Print | Back | Fwd | Close
Reference
64