Avaya S3210R Manual page 74

Getting Started
Home > Administration > Performing acceptance testing
Turning on remote updates
Complete the following procedure to turn on remote updates.
To turn on remote updates between the digital remote machines and the Message Networking system:
1. Start at the Administration menu, and select Message Networking Administration > Remote Machine
Administration > Remote Machine Parameters.
The system displays the Remote Machine Parameters page.
2. From the drop-down menu, select a remote machine.
The system displays the remote machine parameters for the selected remote machine.
3. In the Updates In field, select Yes.
4. In the Updates Out field, select Yes.
5. In the Network Turnaround field, select Yes.
Note: This field is only valid for the machine type INTUITY Release 4.0 or later.
6. Click Save.
7. Repeat Steps 2 through 6 above for each remote machine connected to the Message Networking
system.
8. Verify that the updates have been completed successfully by accessing the Administrator's Log, either
through the Subscriber List by remote machine name or the Remote Machines List.
9. Click Return to Main to return to the Administration menu.
Top of page
Message Networking Help
Admin Maintenance
> Performing remote updates
Home | Search
Print | Back | Fwd |
Reference
> Turning on remote updates
Close
74