Table of Contents
Advertisement
Prism Owner's Manual
V
I
ALVE
NSTALLATION
Step
Action
Slide, open the capacitive
1.
touch module.
Disconnect the wires from
2.
the capacitive touch module.
3.
Remove the rear cover
4. Apply Dow 111 or equal lube
on O - rings before
assembling the valve body.
Align the inlet holes of "valve
body" with outlet holes of
back block.
Publication Number: 548000037
Table 7.
Wires from valve body
to Capacitive touch modules
Capacitive Touch module
- 16 -
Figure
Figure 27.
Figure 28.
© 2022, Marmon Foodservice Technologies Inc.
Rear Cover
Valve Body
Advertisement
Table of Contents
